Volume 10, Issue 3 (September 2012)                   IJCE 2012, 10(3): 232-244 | Back to browse issues page

XML Print


Abstract:   (12582 Views)

The torsional capacity of unreinforced masonry brick buildings is generally inadequate to provide a stable seismic behavior. The

torsional strength is believed to be the most important parameter in earthquake resistance of masonry buildings and the shear

stresses induced in the bed joints of such building’s walls is an important key for design purposes. Brick buildings strengthened

with wire-mesh reinforced concrete overlay are used extensively for building rehabilitation in Iran. Their quick and simple

applications as well as good appearance are the main reasons for the widespread use of such strengthening technique. However,

little attention has been paid to torsional strengthening in terms of both experimental and numerical approach. This paper reports

the response and behavior of two single-story brick masonry buildings having a rigid two-way RC floor diaphragm. Both

specimens were tested under monotonic torsional moment.Numerical work was carried out using non-linear finite element

modeling. Good agreement in terms of torque–twist behavior, and crack patterns was achieved. The unique failure modes of the

specimens were modeled correctly as well. The results demonstrate the effectiveness of reinforced concrete overlay in enhancing

the torsional response of strengthened building. Having evaluated the verification of modeling, an unreinforced brick building

with wall-to-wall vulnerable connections was modeled so that the effect of these connections on torsional performance of brick

building could be studied. Then this building was strengthened with reinforced concrete overlay and the effect of strengthening

on torsional performance of brick buildings with vulnerable connections was predicted numerically.

Full-Text [PDF 2175 kb]   (4207 Downloads)    
Type of Study: Research Paper | Subject: Structure-Earthquake

Rights and permissions
Creative Commons License This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.